info@strappingtoolppt.com
+91 7604 006 074
Manual Steel Strap Cutter
Model No.: SC-35
Manual Steel Strap Cutter Tool | Heavy Duty Metal Banding Cutter up to 32 mm x 1.27 mm thick strap | Industrial Strapping Cutter for Steel Straps | Easy Cut Hand Tool for Packaging & Pallet Straps.
Description
Simplify your packaging operations with this manual steel strap cutter tool, designed for efficient and precise cutting of steel banding straps. Built for industrial and commercial use, this cutter ensures smooth performance with minimal effort.
Download User Manual
Features:
- Light duty steel strap cutter.
- Unique Design.
- Easy to operate & maintain.
- Less cutting pressure required due to special ground profile of cutting edges.
Special Features:
- Cutting edges are hard faced with Cobalt alloy which enables the cutter to cut 31.75mm×1.0mm High tensile strap with minimum pressure.
- Longer life as cutting edges are ground finish.
Specification:
- Strap Thickness : Up to 1.0 mm / 0.040″
- Strap Width : Up to 31.75 mm / 1 ¹⁄₄″
- Grade : Regular Duty or High Tensile.
- Weight : 0.750 kg / 1.65 lb. (approx.)
- Dimension (L × W × H) : 290 mm × 50 mm × 66 mm / 11.4″ × 2″ × 2.6″
OPERATIONAL MANUAL:
- Place one gloved hand on the strap and position yourself so that you are not in the path of the strapping.
- Cut the strap several inches away from your hand. The cut should be made so that the flying strap is too short to reach any part of the body.
- Strapping should be cut squarely, not at an angle to avoid sharp strap edge.
- Immediately dispose of all strapping to avoid accidents and injury.
MAINTENANCE:
DAILY INSPECTION:
- Perform a daily visual inspection for any signs of wear or damage.
- Check and tighten all bolts and fasteners.
- Lubricate all moving parts before operating the machine.
WEEKLY INSPECTION:
- Clean the machine to prevent dust and debris build-up.
- Check and tighten all bolts and fasteners.
- Replace any worn-out components.
MONTHLY INSPECTION:
- Inspect critical components for signs of wear and replace if necessary.
- Maintain a log of all maintenance activities.
QUARTERLY INSPECTION:
- Conduct a thorough inspection of the entire system.
- Replace any worn-out components.
ANNUAL INSPECTION:
- Perform a comprehensive overhaul of the system.
- Schedule a professional inspection and servicing.
SAFETY INSTRUCTIONS:
- Wear your safety shoes, gloves, Helmet and safety glasses at all times.
- Remove oil or grease from your hands, tools and from the floor and area where you will be working.
- Use proper cutting tool as per type, size of the strap to be cut.
- Keep fingers way from areas that can pinch or cut. These areas are located at the front of the tool.
- Only use equipment recommended for the strap. “SC-35” is recommended only for 1.0 mm thick × 31.75 mm wide strap.
