info@strappingtoolppt.com
+91 7604 006 074
Pneumatic Steel Strap Sealer
Model No.: S-177L
Pneumatic Steel Strap Sealer 32 mm | Medium Duty Air Powered Strapping Sealing Tool | Single Notch Reverse (Up Cut) | For Regular & High Tensile Steel Straps.
Description
Ensure strong and consistent sealing performance with this medium-duty pneumatic steel strap sealer, designed for efficient use in industrial and commercial packaging applications. Featuring a single notch reverse (up cut) sealing mechanism, this air-powered tool delivers secure and uniform joints, improving load stability during storage and transportation.
Download User Manual
Features:
- Medium duty Pneumatic Steel Strap Sealer.
- Single Notch reverse type (up cut).
- Easy to operate & maintain.
Specification:
- Strap Thickness : 0.79 mm – 0.89 mm / 0.031″ – 0.035″
- Strap Width : 31.75 mm / 11/4″
- Grade : Regular Duty or High Tensile.
- Joint Efficiency : 75% – 80%
- Operating Air Pressure : 6.0 kg/cm² – 6.5 kg/cm²
- Weight : 4.55 kg / 10.0 lb.
- Dimension (L X W X H) : 280 mm × 135 mm × 270 mm / 11.02″ × 5.32″ × 10.6″
| Index No. | Part Number | Part Name | Quantity |
|---|---|---|---|
| 1 | S177C0001B | AIR INLET NUT | 1 |
| 2 | OMITTED | OMITTED | 0 |
| 3 | S177C0003B | VALVE BODY WASHER | 2 |
| 4 | S177C0004B | SPRING FOR VALVE | 1 |
| 5 | S177C0005F | WASHER LOCK (SHORT) | 1 |
| 6 | S177C0006B | VALVE POPPET WASHER | 2 |
| 7 | S177C0007F | VALVE BODY | 1 |
| 8 | S177C0008B | O-RING FOR VALVE BODY | 1 |
| 9 | S177C0009F | VALVE POPPET | 1 |
| 10 | S177C0010F | WASHER LOCK (LONG) | 1 |
| 11 | S177C0011B | C-PIN-1 | 1 |
| 12 | S177C0012F | TRIGGER LINK | 1 |
| 13 | S177C0013F | TRIGGER | 1 |
| 14 | S177C0014B | C-PIN-2 | 1 |
| 15 | S177C0015B | C-PIN-3 | 1 |
| 16 | S177C0016F | CYLINDER BODY | 1 |
| 17 | S177C0017B | WASHER | 2 |
| 18 | S177C0018B | NUT FOR PISTON ROD | 1 |
| 19 | S177C0019B | OIL SEAL FOR PISTON | 1 |
| 20 | S177C0020F | PISTON | 1 |
| 21 | S177C0021B | CYLINDRICAL SPRING FOR PISTON | 1 |
| 22 | S177C0022B | SCREW FOR CYLINDER HEAD | 8 |
| 23 | S177C0023B | SPRING WASHER | 8 |
| 24 | S177C0024F | CYLINDER HEAD | 1 |
| 25 | S177C0025F | PISTON ROD | 1 |
| 26 | S177C0026F | PIN FOR UPPER LINK | 1 |
| 27 | S177C0027F | UPPER LINK | 2 |
| 28 | S177C0028B | C-PIN-4 | 2 |
| 29 | S177C0029F | PIN FOR LOWER LINK | 2 |
| 30 | S177C0030F | LOWER LINK | 2 |
| 31 | S177C0031F | RIVET PIN WITH WASHER FOR LOWER LINK | 1 |
| 32 | S17710032F | JAW | 2 |
| 33 | S177C0033F | PIN TO HOLD JAW & LOWER LINK | 2 |
| 34 | S177C0034F | SPACER | 2 |
| 35 | S177C0035B | SCREW FOR SIDE PLATE | 2 |
| 36 | S177C0036B | NOTCHER BOLT | 2 |
| 37 | S17710037F | SIDE PLATE | 2 |
| 38 | S177C0038B | NUTS FOR SIDE PLATE BOLTS | 4 |
| 39 | S177C0039B | NOTCHER NUT | 2 |
OPERATIONAL MANUAL:
- Before connecting the pneumatic hose connector with machine please check the FRL is fitted with pneumatic hose line and the hose is in safe working condition.
- Connect the pneumatic connector with the tool.
- Check the on line air pressure.
- Hold the tool vertically & place the jaws across the seal. This seal is very important as a seal crimped off-centre may cause the strap become loose & snap apart, possibly resulting in serious injury.
- Press the trigger to seal the strap. For double notching repeat the operation after placing the sealer on the seal maintaining a suitable gap with the previous notch.
- Remove the sealer & inspect the seal to verify the seal is properly holding the strap. The seal should have two impressions, one on each side. The notches should be centered on the seal. If impression isn`t properly formed, remove it & do it again with new seal & strap. Attempting to reseal will not ensure a proper seal & will decrease the break strength.
MAINTENANCE:
DAILY INSPECTION:
- Perform a daily visual inspection for any signs of wear, damage leaks.
- Check and tighten all bolts and fasteners.
- Lubricate all moving parts before operating the machine – especially the lubricating point provided in the machine.
WEEKLY INSPECTION:
- Clean the machine to prevent dust and debris build-up.
- Check and tighten all bolts and fasteners.
- Replace any worn-out components.
MONTHLY INSPECTION:
- Inspect critical components for signs of wear and replace if necessary.
- Maintain a log of all maintenance activities.
QUARTERLY INSPECTION:
- Conduct a thorough inspection of the entire system.
- Replace any worn-out components.
ANNUAL INSPECTION:
- Perform a comprehensive overhaul of the system.
- Schedule a professional inspection and servicing.
SAFETY INSTRUCTIONS:
- Only trained personnel should operate above mentioned tools.
- Wear Gloves, Safety shoe, Helmet & Goggle before starting operation.
- Remove oil or grease from your hands, tools and from working area.
- Keep fingers away from areas that can pinch or cut. These areas are primarily located at the front of the tool.
- Only use this tool recommended for the strap which is specified in the catalogue.
Related Products
