info@strappingtoolppt.com
+91 7604 006 074
Heavy Duty Manual Steel Strap Cutter
Model No.: SC-150
Heavy Duty Steel Strap Cutter Tool | Industrial Metal Banding Cutter up to 32 mm x 1.45 mm thick strap | High Strength Manual Strapping Cutter | Professional Steel Band Cutting Tool for Packaging.
Description
Handle the toughest cutting tasks with this heavy duty manual steel strap cutter tool, designed for industrial-grade performance and durability. Built to cut thick and high tensile steel straps, this tool is ideal for demanding environments where reliability and strength are critical.
Download User Manual
Features:
- Heavy duty steel strap cutter.
- Unique Design.
- Easy to operate & maintain.
- Less cutting pressure required.
Special Features:
- Top cutter blade is elliptical and manufactured from high grade tool steel and hardened to 58/60HRc. It has 4 cutting edges. Bottom cutter blade manufactures from rolled medium carbon steel and hard faced with cobalt base alloy that’s why tapered edge doesn’t break and has longer life.
Specification:
- Strap Thickness : Up to 1.45 mm / 0.057″
- Strap Width : Up to 31.75 mm / 1 ¹⁄₄″
- Grade : Regular Duty or High Tensile
- Weight : 4.5 kg / 9.92 lb. (approx.)
- Dimension (L × W × H) : 698.5 mm × 50.8 mm × 203.2 mm / 27.5 ″ × 2″ × 8″
| INDEX | PART NUMBER | PART NAME | QTY. |
|---|---|---|---|
| 1 | MSSC01271A | BOTTOM HANDLE HEAD ASSY. | 1 |
| 2 | MSSC02272A | TOP HANDLE HEAD ASSY. | 1 |
| 3 | MSSC03270F | TOP CUTTER BLADE | 1 |
| 4 | MSSC04270F | BOTTOM CUTTER BLADE | 1 |
| 5 | MSSC05270F | LINK | 1 |
| 6 | MSSC06270F | STRAP GUIDE | 1 |
| 7 | OMITTED | OMITTED | 1 |
| 8 | MSSC08270F | SHOULDER SCREW | 2 |
| 9 | MSSC09270F | TIGHTENING BOLT | 1 |
| 10 | MSSC10270F | TOP HANDLE BOLT | 2 |
| 11 | MSSC11270F | STRAP GUIDE SCREW | 2 |
| 12 | MSSC12270F | CASTLE NUT | 2 |
| 13 | OMITTED | OMITTED | OMITTED |
| 14 | OMITTED | OMITTED | OMITTED |
| 15 | MSSC15270F | HANDLE GRIP | 2 |
OPERATIONAL MANUAL:
- Place one gloved hand on the strap and position yourself so that you are not in the path of the strapping.
- Cut the strap several inches away from your hand. The cut should be made so that the flying strap is too short to reach any part of the body.
- Strapping should be cut squarely, not at an angle to avoid sharp strap edge.
- Immediately dispose of all strapping to avoid accidents and injury.
MAINTENANCE:
DAILY INSPECTION:
- Perform a daily visual inspection for any signs of wear or damage.
- Check and tighten all bolts and fasteners.
- Lubricate all moving parts before operating the machine.
WEEKLY INSPECTION:
- Clean the machine to prevent dust and debris build-up.
- Check and tighten all bolts and fasteners.
- Replace any worn-out components.
MONTHLY INSPECTION:
- Inspect critical components for signs of wear and replace if necessary.
- Maintain a log of all maintenance activities.
QUARTERLY INSPECTION:
- Conduct a thorough inspection of the entire system.
- Replace any worn-out components.
ANNUAL INSPECTION:
- Perform a comprehensive overhaul of the system.
- Schedule a professional inspection and servicing.
SAFETY INSTRUCTIONS:
- Wear your safety shoes, gloves, helmet and safety glasses at all times.
- Remove oil or grease from your hands, tools and from the floor and area where you will be working.
- Use proper cutting tool as per type, size of the strap to be cut.
- Keep fingers way from areas that can pinch or cut. These areas are located at the front of the tool.
- Only use equipment recommended for the strap. “SC-150” is recommended only for Up to 1.27 mm thick × up to 31.75 mm wide strap.
WARNING:
- Improper use may result in blindness, severe laceration, amputation.
Related Products
