info@strappingtoolppt.com | +91 7604 006 074
Custom Order
Enquire Now Download Brochure

Pneumatic Steel Strap Sealer

Model No.: PSNDS-11457

Heavy Duty Pneumatic Steel Strap Sealer 32 mm x 1.45 mm thick strap | Side Action Air Powered Strapping Tool | Single Notch Down Cut | For High Tensile, Painted, Waxed & M.S Steel Straps (Industrial Grade).

Description

Handle the toughest strapping applications with this heavy-duty pneumatic steel strap sealer, built for high-strength performance and industrial reliability. Designed with a single notch regular (down cut) side action mechanism, this air-powered tool delivers powerful and consistent sealing, ensuring maximum load stability during transport and storage, used for Wagon Unitization.

PDF Icon Download User Manual

Features:

  • Heavy duty Pneumatic Steel Strap Sealer.
  • Single Notch Regular type (Down Cut) Side Action.
  • Easy to operate & maintain.

Specification:

  • Strap Thickness : 1.45 mm / 0.057″
  • Strap Width : 31.75 mm / 1 ¼ “
  • Grade : High Tensile, Painted and Waxed.
  • Joint Efficiency : 75% – 80% for Single Seals, 80% – 85% for Double Seals.
  • Operating Air Pressure : 7.5 kg/cm2 – 8 kg/cm2 in running condition
  • Weight : 6.9 kg / 15.1 lb. (Approx.)
  • Dimension (L × W × H) : 460 mm x 190 mm x 250 mm / 18.11″ × 7.48″ × 9.84″
Index No. Part Number Part Name Quantity
1 PSNDS0001F Side Plate 2
2 PSNDS0002F Pin for Side Plate, Jaw and Notcher 2
3 PSNDS0003F Jaw 4
4 PSNDS0004F Notcher 1
5 PSNDS0005F Pin for Jaw and Notcher 2
6 PSNDS0006F Link 2
7 PSNDS0007F Jaw Link Pin 2
8 PSNDS0008F Piston Rod 1
9 PSNDS0009F Slider Pin 1
10 PSNDS0010F Bolt for Side Plate and Notcher 3
11 PSNDS0011F ‘O’ Ring for Cylinder Body 1
12 PSNDS0012F Cylinder Body 1
13 PSNDS0013F ‘O’ Ring for Piston 1
14 PSNDS0014F Piston 1
15 PSNDS0015F Piston Support Spacer 1
16 PSNDS0016F Piston Support Washer 1
17 PSNDS0017F Lock Nut for Piston Rod 1
18 PSNDS0018F Gasket 1
19 PSNDS0019F Rubber Washer for Valve 3
20 PSNDS0020F Valve Net Spacer 3
21 PSNDS0021F Valve ‘O’ Ring 3
22 PSND22322F Valve Stem 1
23 PSNDS0023F Valve Spacer No.-1 1
24 PSNDS0024F Valve Spring 1
25 PSNDS0025F Valve Spacer No.-2 1
26 PSNDS0026F Cylinder Body Cover 1
27 PSNDS0027F Screw for Cylinder Body 12
28 PSND22328F Handle No.-1 1
29 PSNDS0029F ‘O’ Ring for Handle No.-1 1
30 PSNDS0030F Screw for Handle 8
31 PSNDS0031F Handle No.-2 1
32 PSNDS0032F Nylock Nut for Side Plate 1
33 PSNDS0033F Trigger 1
34 PSNDS0034F Screw for Trigger 1
35 PSNDS0035F Nut for Trigger Screw 1

OPERATIONAL MANUAL:

  • Before connecting the pneumatic hose connector with machine please check the FRL is fitted with pneumatic hose line and the hose is in safe working condition.
  • Check the Pneumatic connector with the tool.
  • Check the on line air pressure.
  • Hold the tool vertically & place the jaws across the seal. This seal is very important as if the seal is crimped off-centre it may cause the strap become loose & snap apart, possibly resulting in serious injury.
  • Press the trigger to seal the strap.
  • Remove the sealer & inspect the seal to verify the seal is properly holding the strap. The seal should have four impressions, two on each side. The notches should be cantered on the seal. If impression isn`t properly formed, remove it & do it again with new seal & strap. Attempting to reseal will not ensure a proper seal & will decrease the break strength.

MAINTENANCE:

DAILY INSPECTION:
  • Perform a daily visual inspection for any signs of wear, damage leaks.
  • Check and tighten all bolts and fasteners.
  • Lubricate all moving parts before operating the machine – especially the lubricating point provided in the machine.
WEEKLY INSPECTION:
  • Clean the machine to prevent dust and debris build-up.
  • Check and tighten all bolts and fasteners.
  • Replace any worn-out components.
MONTHLY INSPECTION:
  • Inspect critical components for signs of wear and replace if necessary.
  • Maintain a log of all maintenance activities.
QUARTERLY INSPECTION:
  • Conduct a thorough inspection of the entire system.
  • Replace any worn-out components.
ANNUAL INSPECTION:
  • Perform a comprehensive overhaul of the system.
  • Schedule a professional inspection and servicing.

SAFETY INSTRUCTIONS:

  • Only trained personnel should operate `PSNDS-11457’.
  • Wear Gloves, Safety shoe, Helmet & Goggle before starting operation.
  • Remove oil or grease from your hands, tools and from the working area.
  • Keep fingers away from areas that can pinch or cut. These areas are primarily located at the front of the tool.
  • Only use this equipment recommended for the strap. `PSNDS-11457’ recommended only for 1.45 mm / 0.057” thick × 31.75 mm / 1¼” width strap.

Related Products

HPTR-11457