info@strappingtoolppt.com
+91 7604 006 074
Heavy Duty Manual Sealer
Model No.: HSNDS-11450
Manual Steel Strap Sealer | 31.75 mm x 1.27 mm Heavy Duty Banding Tool | Single Notch Down Cut | Secure & Reliable Sealing for Cargo, Pallets & Containers.
Description
This Manual Steel Strap Sealer is designed for professionals needing consistent and reliable sealing of steel straps. It supports 31.75 mm wide, 1.27 mm thick high tensile painted & waxed steel straps, making it perfect for heavy industrial applications.
Whether you are securing pallets, container lashing, or cargo in shipping yards, industrial facilities or wagon unitization this tool provides professional-grade sealing performance every time.
Download User Manual
Features:
- Heavy Duty Manual Steel Strap Sealing.
- Suitable for working with steel strapping.
- Handy Tool.
- Single Notch regular type (Down cut) side action.
- Easy to operate & maintain.
Specification:
- Strap Thickness : 1.27 mm / 0.057”
- Strap Width : 31.75 mm / 11/4”
- Grade : High Tensile.
- Joint Efficiency : 75% – 80%
- Weight : 4.2 kg / 9.259 lb. (Approx.)
- Dimension (L X W X H) : 745 mm × 48 mm × 278 mm / 29.3̎ × 1.9̎ × 10.9”
| INDEX | PART NUMBER | PART NAME | QUANTITY |
|---|---|---|---|
| 1 | MSSHD1230F | JAW | 4 |
| 2 | MSSHD2230F | NOTCHER PLATE | 1 |
| 3 | MSSHD3230F | PIN FOR JAW & NOTCHER | 2 |
| 4 | MSSHD4230F | LINK BAR | 1 |
| 5 | MSSHD5230F | LINK BAR PIN | 4 |
| 6 | MSSHD6230F | LINK | 1 |
| 7 | SMDR070C0B | HANDLE GRIP | 2 |
| 8 | MSSHD8230F | SIDE PLATE | 2 |
| 9 | MSSHD9230B | M8 BOLT | 4 |
| 10 | MSSHD1023F | LOWER HANDLE HEAD | 1 |
| 11 | OMITTED | OMITTED | OMITTED |
| 12 | MSSHD1223F | UPPER HANDLE HEAD | 1 |
| 13 | MSSHD1323B | NYLOCK NUT M8 SIZE | 4 |
| 14 | MSSHD1423F | PIN FOR SIDE PLATE, UPPER HANDLE HEAD, JAW & NOTCHER | 3 |
| 15 | MSSHD1523F | UPPER HANDLE HEAD REST PIN | 1 |
OPERATIONAL MANUAL:
- Hold the “HSNDS-11450” vertically, opened the Jaws & place the jaws across the seal. This seal is very important, if the seal is crimped off-centre it may cause the strap become loose & snap apart, possibly resulting in serious injury.
- Press the handle of the sealer together until the proper sealing done, while keeping the sealer in vertical position.
- Remove the sealer & inspect the seal to verify the seal is properly holding the strap. The seal should have four impressions, one on each side. The notches should be centred on the seal. If impression isn`t properly formed, remove it & do it again with new seal & strap. Attempting to reseal will not ensure a proper seal & will decrease the break strength.
- Never use the sealer to break the strap. Breaking the strap without the proper cutter may cause the strap to snap back towards the operator, possibly resulting in serious injury. This action will also cause damage to the sealer, which will require the sealer to be repaired or replaced at owner`s expense.
MAINTENANCE:
DAILY INSPECTION:
- Perform a daily visual inspection for any signs of wear or damage.
- Check and tighten all bolts and fasteners.
- Lubricate all moving parts before operating the machine.
WEEKLY INSPECTION:
- Clean the machine to prevent dust and debris build-up.
- Check and tighten all bolts and fasteners.
- Replace any worn-out components.
MONTHLY INSPECTION:
- Inspect critical components for signs of wear and replace if necessary.
- Maintain a log of all maintenance activities.
QUARTERLY INSPECTION:
- Conduct a thorough inspection of the entire system.
- Replace any worn-out components.
ANNUAL INSPECTION:
- Perform a comprehensive overhaul of the system.
- Schedule a professional inspection and servicing.
SAFETY INSTRUCTIONS:
- Only trained personnel should operate “HSNDS-11450”.
- Wear Gloves, Safety shoe, Helmet & Goggle before starting operation.
- Keep fingers away from areas that can pinch or cut. These areas are primarily located at the front of the tool.
- Only use equipment recommended for the strap. “HSNDS-11450” is recommended only for 1.27 mm thick × 31.75 mm width.
Related Products
