Follow us:

Pneumatic Tensioner T-177R
Pneumatic Tensioner T-177R - Image 2
Pneumatic Tensioner T-177R - Image 3

Pneumatic Tensioner T-177R

MODEL NO.: T-177R

  • Pneumatic Pusher type Tensioner.
  • Roller frame fitted with Roller instead of Pressure Pad.
  • Strap thickness – Up to 0.89mm/0.035”
  • Strap width – 19.05 – 31.75 mm/ 3⁄4″ – 11⁄4”
  • Grade – Same as T177 E and also can be used with Dry strap
  • Operating Air pressure – 5.5 – 6.0 kg./cm2.
  • Tension Achievable – 725 kg/1600 lb at 6kg/cm2 (84 psi)

₹60,000.00

Product Details

This pneumatic tensioner is generally designed for heavy-duty industrial applications. The product works great for flat and round necks. The product features a fast roller opening and fast strap tensioning when used in conjunction with a pneumatic sealer.

Pneumatic Tensioner can provide you with a strap thickness of about “0.89mm/0.035mm” with a width of 19.05 – 31.75 mm/3⁄4″ – 11⁄4”. It needs air pressure of about 5.5 – 6.0 Kg/cm2 for efficient operation. It can achieve a high tension level that goes up to 725 Kg/1600lb at 6 Kg/cm2 (84 psi). To get more details about the pneumatic tensioner, you can contact Romi Packaging. You can also purchase this product from our website securely.

FEATURES
  • Pneumatic Pusher type Feed wheel Steel Strap Tensioner.
  • Including Push Type Quick Disconnect Plug and Socket.
  • Roller frame fitted with Roller instead of Pressure Pad.
  • Suitable for use on Flat, Round, Irregular & Narrow Surface.
  • Suitable for used with high tensile and lubricated strap.
  • Easy to operate and maintain.
SPECIFICATIONS

For Use with: Steel Strapping
Tool Strength: Heavy Duty
Tool Power Source: Pneumatic
For Strapping Width: 19.05mm to 31.75mm // 3/4″ to 1 1/4″
For Strapping Thickness: Up to 0.044″ // 1.12mm
Overall Height x Width x Length: 140mm x 118mm x320mm // 5.51’’ x 4.65’’ x 12.60’’
Material: Alloy Steel, Aluminium Alloy
Weight: 4.8kg // 10.6 lbs.
Required Pressure: 90 psi
Feed wheel RPM: 48 nos.
Tension Capacity: 1600 lb.
Tool Seal Type: Pusher Seals

OPERATIONAL MANUAL
  1. Pull the strap from the coil & insert the strap in to the seal in such a way so that flat surface of the seal remains facing outside the strap.
  2. Apply the strap around the package and bottom strap insert through the seal. Then hold the overlap portion of the straps with your left hand.
  3. Bend the extended strap as Hook against the seal.
  4. Pull out excess slack with your right hand.
  5. Hold together the handle and body of the air motor with your right hand and lift upward the air motor portion against the handle to make gap between feed wheel & lower Roller.
  6. Insert the top strap under the strap guide & feed wheel of the tool, at the same time push the tool forward against the Seal, and release by the air motor body.
  7. Turn the Control ring clockwise for tensioning until the proper tension achieved & switch off the motor by turning the control ring anti -clockwise.
  8. Seal the strap by using the recommended Sealer.
  9. Swing the tool up & down until the strap is cut off.
SAFETY INSTRUCTIONS
  1. Before using the tool, read the operating instructions carefully.
  2. Wear hand gloves, safety shoe, Helmet, goggles during operation.
  3.  When cutting the strap hold the upper portion and stand safely away from the strap.
  4. Do not stand in line with the strap while it is tensioned. The strap may break.
  5. Do not put your fingers into the Tensioner wheel area.
  6. Do not put your hand under the strap on the job while strap is tensioned.
  7. Only use equipment recommended for the strap.`T177R’ are recommended only for 0.64 mm to 0.89 mm thk. X 19.05mm and 31.75mm width.

Additional information

Weight 5.800 kg
Dimensions 38 × 18 × 13 cm

Related products

1