MODEL : SC-150
- Heavy Duty Steel Strap Cutter.
- Strap thickness – up to 1.27mm.
- Strap width – up to 31.75mm .
- Less Cutting Pressure Required.
- Special Features-Top cutter Blade is elliptical. It has 4 cutting edges. Bottom cutter Blade manufactured from Rolled medium carbon steel that’s why taper edge doesn’t break.
- Heavy duty steel strap cutter.
- Unique Design.
- Easy to operate & maintain.
- Less cutting pressure required.
- Special Features: Top cutter blade is elliptical and manufactured from high grade tool steel and hardened to 58/60HRc. It has 4 cutting edges. Bottom cutter blade manufactures from rolled medium carbon steel and hard faced with cobalt base alloy that’s why tapered edge doesn’t break and has longer life.
Strap Width: up to 31.75mm / 1 1/ 4 ”
Grade: Regular Duty or High Tensile.
Weight: 4.5 kg / 9.92 lb. (approx)
Dimensions (L × W × H): 698.5 mm × 50.8mm × 203.2 mm / 27.5 ” × 2 “× 8 “
|
INDEX |
PART NUMBER |
PART NAME |
QTY. |
|
01 |
MSSC01271A |
BOTTOM HANDLE HEAD ASSY. |
01 |
|
02 |
MSSC02272A |
TOP HANDLE HEAD ASSY. |
01 |
|
03 |
MSSC03270F |
TOP CUTTER BLADE |
01 |
|
04 |
MSSC04270F |
BOTTOM CUTTER BLADE |
01 |
|
05 |
MSSC05270F |
LINK |
01 |
|
06 |
MSSC06270F |
STRAP GUIDE |
01 |
|
07 |
MSSC07270F |
REST PIN |
01 |
|
08 |
MSSC08270F |
SHOULDER SCREW |
02 |
|
09 |
MSSC09270F |
TIGHTENING BOLT |
01 |
|
10 |
MSSC10270F |
TOP HANDLE BOLT |
02 |
|
11 |
MSSC11270F |
STRAP GUIDE SCREW |
02 |
|
12 |
MSSC12270F |
CASTLE NUT |
02 |
|
13 |
OMITTED |
OMITTED |
OMITTED |
|
14 |
OMITTED |
OMITTED |
OMITTED |
|
15 |
MSSC15270F |
HANDLE GRIP |
02 |
|
INDEX |
PART NAME |
QTY |
|
01 |
*BOTTOM HANDLE HEAD |
01 |
|
02 |
#TOP HANDLE HEAD |
01 |
|
03 |
TOP CUTTER BLADE |
01 |
|
04 |
BOTTOM CUTTER BLADE |
01 |
|
05 |
LINK |
01 |
|
06 |
STRAP GUIDE |
01 |
|
07 |
*REST PIN |
01 |
|
08 |
SHOULDER SCREW |
02 |
|
09 |
TIGHTENING BOLT |
01 |
|
10 |
TOP HANDLE BOLT |
02 |
|
11 |
STRAP GUIDE SCREW |
02 |
|
12 |
CASTLE NUT |
02 |
|
13 |
*BOTTOM HANDLE |
01 |
|
14 |
#TOP HANDLE |
01 |
|
15 |
GRIP |
02 |
|
Bellow Items Should be Purchase in Assembly Condition |
||
|
01, 07 & 13 |
Bottom Handle Sub Assembly |
1SET |
|
02 & 14 |
Top Handle Sub assembly |
1SET |
OPERATIONAL MANUAL
1. Place one gloved hand on the strap and position yourself so that you are not in the path of the
strapping.
2. Cut the strap several inches away from your hand. The cut should be made so that the flying strap is
too short to reach any part of the body.
3. Strapping should be cut squarely, not at an angle to avoid sharp strap edge.
4. Immediately dispose of all strapping to avoid accidents and injury.
SAFETY INSTRUCTIONS
1. Wear your safety shoes, gloves, helmet and safety glasses at all times.
2. Remove oil or grease from your hands, tools and from the floor and area where you will be working.
3. Use proper cutting tool as per type, size of the strap to be cut.
4. Keep fingers way from areas that can pinch or cut. These areas are located at the front of the tool.
5. Only use equipment recommended for the strap. “SC-150” is recommended only for (0.25-1.27) mm
thk. x (9.5-31.75) mm wide strap.
WARNING
Improper use may result in blindness, severe laceration, amputation.