Follow us:

MODEL : PN-5

  • Heavy Duty Sheet Nibbling Machine.
  • Portable.
  • Range – Maximum 5mm/0.20” thickness (Mild Steel).
View Product Catalogue
Exploded View & Part List
Operation Maintenance & Safety
Watch Product Video
Enquiry Now
  • Heavy duty Sheet Nibbling Machine
  • Light weight 
  • Portable
  • Easy to operate and maintain
  • Un-skilled operator can run the tool
Maximum Material Thickness To Be Cut                 Required Continuous Working Air Pressure

  • Steel up to 400 N/mm2 – 5.0 mm/0.20”         –               100psi.
  • Steel up to 600 N/mm2 – 3.2 mm/0.13”         –                 90psi.
  • Steel up to 800 N/mm2 – 2.5 mm/0.10”         –                 85psi.
  • Aluminium 250 N/mm2 – 7.0 mm/0.28”         –               100psi.

Average cutting speed:  1.4 m/minute (Varies with Material Sheet Thickness & Air Pressure).
Continuous Rated Air Pressure: 6.0 – 6.5 Kg/Cm2
Weight: 7 Kg / 15.4 lb
Size (L X W X H): 500 x 155 x 240 mm / 19.7”x 6.1”x 9.5”

  AIR-MOTOR AND GEARING SUB-ASSEMBLY
INDEX NO. PART NUMBER PART NAME QUANTITY
01 PSNM00001F END COVER-1 1
02 PSNM00002B BALL BEARINGS, 6003-2Z, SKF OR EQUIVALENT 2
03 PSNM00003F ROTOR WITH 1.5M SUN-PINION 1
04 PSNM00004F ROTOR VANES 5
05 PSNM00005F AIR-CYLINDER 1
06 PSNM00006F END COVER-2 1
07 PSNM00007F 1.5M INTERNAL GEAR 1
08 PSNM00008F 1.5M PLANET PINIONS WITH BUSH 3
09 PSNM00009F PLANET HOLDER 1
10 PSNM00010F PINS FOR PLANET PINIONS 3
11 PSNM00011B BALL BEARINGS, 6007-2Z, SKF OR EQUIVALENT 2
12 PSNM00012F LOCATING PIN FOR MOTOR & INTERNAL GEAR 1
13 PSNM00013F HOUSING FOR MOTOR & GEARING (Machining Drg.) 1
14 PSNM00014B BEARING LOCKING SCREW FOR ROTOR (3/8” UNF) 1
54 PSNM00015B BOLTS FOR MOTOR & CRANK HOUSING (1/4” BSW) 4
  CRANK, PUNCH-HOLDER AND ANVIL SUB-ASSEMBLY
INDEX NO. PART NUMBER PART NAME QUANTITY
15 PSNM00015B BALL BEARINGS, EE-8, SKF OR EQUIVALENT 1
16 PSNM00016F HOUSING FOR CRANK-SHAFT  (MACHINING DRG.) 1
17 PSNM00017B BALL BEARINGS, EE-5, SKF OR EQUIVALENT 1
18 PSNM00018F CRANK SHAFT 1
19 PSNM00019B NEEDLE BEARING WITH FLEXIBLE CAGE (STRIP) 1
20 PSNM00020F CRANK LINK 1
21 PSNM00021F PUNCH HOLDER 1
22 PSNM00022F CONNECTING PIN 1
23 PSNM00023F PUNCH 1
24 PSNM00024F HANDLE PLATES 2
25 PSNM00025B SCREWS FOR HANDLE PLATES 4
26 PSNM00026B HANDLE GRIP (RUBBER) 1
27 PSNM00027F HANDLE GRIP INSERT (ALUMINIUM) 1
28 PSNM00028B SCREWS FOR HANDLE GRIP INSERT 2
29 PSNM00029F LOCKING FLANGE 1
30 PSNM00030B SCREWS FOR LOCKING FLANGE 8
31 PSNM00031F ANVIL 1
32 PSNM00032F GUIDE FOR PUNCH 1
33 PSNM00033B SCREWS FOR GUIDE 2
34 PSNM00034B SCREWS FOR DIE 2
35 PSNM00035F DIE FOR 1-2mm THICK STEEL 1
36 PSNM00036F DIE FOR 2-3mm THICK STEEL 1
37 PSNM00037F DIE FOR 3-5mm THICK STEEL 1
38 PSNM00038F DIE FOR 7mm THICK ALUMINIUM 1
52 PSNM00052B CIRCLIP FOR CONNECTING PIN 1
53 PSNM00053B LOCKING SCREW FOR ANVIL 1
       
  BACK-COVER-HANDLE AND TRIGGER-VALVE SUB-ASSEMBLY
INDEX NO. PART NUMBER PART NAME QUANTITY
39 PSNM00039F REAR HANDLE AND TRIGGER-VALVE HOUSING 1
40 PSNM00040B SHC SCREWS FOR REAR HANDLE, 2-BA x 32mm L 6
41 PSNM00041F ADAPTER FOR NIPPLE 1
42 PSNM00042F ADAPTOR DUST-CAP 1
43 PSNM00043B VALVE SPRING 1
44 PSNM00044F VALVE PIN 1
45 PSNM00045F VALVE CAP 1
46 PSNM00046B VALVE-PIN SPRING 1
47 PSNM00047B VALVE-PIN NUT 1
48 PSNM00048F SPACER 1
49 PSNM00049F VALVE BODY 1
50 PSNM00050F VALVE BUSH 1
51 PSNM00051F TRIGGER 1
55 PSNM00055F TRIGGER PIN 1
56 PSNM00056F LEVER 1
57 PSNM00057F LEVER PIN 1
58 PSNM00058F PAWL BLOCK 1
59 PSNM00059B GRUB SCREW 4
60 PSNM00060F RELEASE BUTTON 1
61 PSNM00061F LOCK PLATE 1
62 PSNM00062F PAWL BLOCK SIDE-SPRING 1
63 PSNM00063F PAWL BLOCK BOTTOM-SPRING 1

OPERATIONAL MANUAL

  1. Before connecting the pneumatic hose connector with machine please check the FRL is fitted with pneumatic hose line and the hose in safe working condition.
  2. Mark the cut line on the job. Set the tool as per size & grade of the material to be cut.
  3. Connect the pneumatic connector with the tool & check the air line pressure.
  4. Let the tool idle for few seconds.
  5. To establish the best control possible when cutting, hold the front & rear handle of the tool with two hands & stabilized your hands & body against the job.
  6. Push on the trigger in a control manner & set the tool into the work piece to begin cutting. As the cut progresses, keep the tool in proper setting against the job for smooth cutting.
  7. When finished or if leaving the area and disconnect the tool from air line & keep it in proper place.

SAFETY INSTRUCTIONS

  1.  Wear your safety shoes, gloves, goggles & helmet.
  2. Remove oil or grease from your hands, tools and from the floor and area where you will be working.
  3. Use proper cutting tool as per type, size and hardness of metal to be cut. Don’t force the tool to do a job for which it wasn’t designed.
  4. Follow the operation instruction.
  5. Keep tool lubricated & clean for best & safest performance.
1