Follow us:

MODEL : PHS-250

  • Light Duty.
  • Portable.
  • Range – Maximum 2.5mm/0.10” thickness (Mild Steel).
View Product Catalogue
Exploded View & Part List
Operation Maintenance & Safety
Enquiry Now
  • Light duty Pneumatic Hand Shear Machine
  • Light weight 
  • Portable
  • Easy to operate and maintain
  • Un-skilled operator can run the tool
  • It has fully adjustable stroke and the offset anvil is designed to provide excellent operator visibility along the cutting line for both inside and outside cutting work

Cutting Capacity

:

M.S. Sheet up to 2.5mm/ 0.10” thickness.

Operating Air pressure

:

6 – 6.5 kg/cm2

Weight

:

5.5 kg / 12.1 lb

Dimension

:

280 x 205 x 230 mm /11”x 8”x 9”
SPARE PART LIST OF PHS – 250

 

INDEX NO. PART NO. PART NAME QTY.
01 PHSC00001F Rotor Screw 1
02 PHS250002B Bearing(6002) 2
03 PHS250003F End Plate No. 1 1
04 PHS250004F Gap Piece 2
05 PHS250005F Cylinder 1
06 PHS250006F Rotor 1
07 PHS250007F Rotor Blade 5
08 PHS250008F End Plate No. 2 1
09 PHS250009F Cylinder Pin 1
10 PHS250010F Ring 1
11 PHS250011F Idle Gear Bush 3
12 PHS250012F Idle Gear 3
13 PHS250013F Idle Gear Pin 3
14 PHS250014B Bearing (EE5) 2
15 PHS250015F Gear Box 1
16 PHS250016F Lock Pin 1
17 PHS250017F Internal Gear 1
18 PHS250018F Body 1
19 PHS250019F Top Handle 1
20 PHSC00020B Hex Bolt 1
20A PHSC0020AB Hex Bolt 1
21 PHSC00021B Bearing(1202) 1
22 PHSC00022B Cam Housing Bolt 4
23 PHS250023F Crank Shaft 1
24 PHS250024F Oil Cap 1
25 PHS250025F Cap 1
26 PHS250026F OMITTED —
27 PHS250027F Cam Housing 1
28 PHS250028F Handle Socket 1
29 PHSC00029F Front Handle 1
65 PHS250065F Washer For Fixed Cutter 1
31 PHS250031F Ram 1
32 PHS250032F Adjust Bolt 1
33 PHSC00033F Moving Cutter Blade 1
34 PHS250034F Spring Washer 1
35 PHS250035C S.H.C. Screw 1
36 PHSC00036F Fixed Cutter Blade 1
37 PHSC00037B S.S. Screw/ GAP SCREW 1
38 PHSC00038B S.H.C. Screw/ SCOKET HEAD SCREW 1
39 PHSC00039B S.H.C. Screw 2
40 PHS250040F Dowel Pin 2
41 PHS250041F Cam Bush 1
42 PHS250042F Horse Shoe 1
43 PHS250043F Rear Handle 1
44 PHSC00044F Lever 1
45 PHSC00045F Trigger Pin 1
46 PHSC00046F Trigger 1
47 PHSC00047F Lever Pin 1
48 PHSC00048F Lock Plate 1
49 PHSC00049F Trigger Bottom 1
50 PHSC00050B Lock Plate Spring 1
51 PHSC00051B Bottom Spring 1
52 PHSC00052F Pawl Block 1
53 PHSC00053B S.H.C. Screw 4
54 PHSC00054B Set Screw 4
55 PHSC00055F Gasket 2
56 PHSC00056F Valve Bush 1
57 PHSC00057F Valve Body 1
58 PHSC00058F Valve Pin 1
59 PHSC00059F Valve Cap 1
60 PHSC00060B Spring 1
61 PHSC00061F Valve Pin Nut 1
62 PHSC00062F Spacer 1
63 PHSC00063B Spring 1
64 PHSC00064F Adapter 1

OPERATIONAL MANUAL

  1. Connect the Pneumatic Quick disconnect socket with the tool.
  2. Before connecting the pneumatic hose with Quick disconnect socket fitted with the tool, Please check the FRL is fitted with pneumatic hose line and the hose in safe working condition.
  3. Check the on line air pressure at the end of the tool.
  4. Let the tool idle for few seconds.
  5. Apply lubricating oil on the sheet in the line of cutting for smooth movement of cutter Blades and ensure a ground clearance of the sheet so that the Horse of the Hand Shear does not rub with the ground or any other foreign materials.
  6. To establish the best control possible when cutting, hold the front & rear handle of the tool with two hands & stabilized your hands & body against the job.
  7. Push on the trigger in a control manner & set the tool into the work piece to begin cutting. As the cut progresses, keep the tool in proper setting against the job for smooth cutting.
  8. When finished or if leaving the area disconnects the tool from air line & keeps it in proper place.

NOTE:

1. An AIR FILTER, REGULATOR, LUBRICATOR unit must be installed as close to the air tool as possible.
A Quick disconnect Socket fitting must be installed at the end of the Tool.

MAINTENANCE

    DAILY INSPECTION:

    1. Perform a daily visual inspection for any signs of wear, damage, or leaks.
    2. Examine Pneumatic hoses and connections for any wear or damage.
    3. Check and tighten all bolts and fasteners.
    4. Lubricate all moving parts before operating the machine.
    5. Apply lubricating oil at the air inlet point and operate the trigger to allow the oil to lubricate the valve position. Carry out this practice every day at the start of work and at the end of the day.
    6. Clean travel area of the Moving Blade and Fixed Blade.

    WEEKLY INSPECTION:

    1. Inspect for any Air leaks.
    2. Clean the machine to prevent dust and debris build-up.

    MONTHLY INSPECTION:

    1. Inspect critical components for signs of wear and replace if necessary.
    2. Maintain a log of all maintenance activities.

    ANNUAL INSPECTION:

    1. Perform a comprehensive overhaul of the system.
    2. Schedule a professional inspection and servicing

    SAFETY INSTRUCTIONS

    1. Before using the tool, read the operating instructions carefully.
    2. Must Operated by a Trained Personnel equipped with appropriate Personal Protective Equipment (PPE).
    3. This Model is Suitable for certain Size of Sheet and Tensile Strength. Do not ever try to cut Oversize Sheet and Greater Tensile Strength.
    4. Ensure the Sheet is placed securely between the Moving and Fixed Blade.
    5. Keep adequate ground clearance for free movement of tool.
    6. While the tool is not in use, turn off the air Supply.
    7. Before the Operation make sure to keep hands and body clear of the Blades.
    8. During the Operation Don’t let any Untrained and Unauthorized personnel near the machine.
    1