MODEL : HPTR-11457

Strap Thickness: 1.27mm–1.45mm / 0.050”–0.057”
Strap width: 31.75 / 1¼ “
Grade: – High Tensile, Heavy Duty, Painted & Waxed.
Operating Air Pressure: 8.0 to 8.5 kg/cm² in running condition at tool point.
Weight: 9 kg/ 19.8 lb (approx)
Dimension(LXWXH): 385×140×150mm/15.15 ̎× 5.51̎× 5.90 ̎

Strap Thickness: 1.27mm–1.45mm / 0.050”–0.057”

Strap width: 31.75 / 1¼ “

Grade: – High Tensile, Heavy Duty, Painted & Waxed.

Operating Air Pressure: 8.0 to 8.5 kg/cm² in running condition at tool point.

Air consumption: 14.0 to 15.0 CFM (During Tensioning)

Weight: 9 kg/ 19.8 lb (approx)

Dimension (LXWXH): 385×140×150mm/15.15 ̎× 5.51̎× 5.90 ̎

Tension Achievable: 4000 lb/1740 N

SPARE PART LIST FOR AIR MOTOR ASSY. OF HPTR-11457

PART NO.	PART NUMBER	PART NAME	QTY.
01	HPTR57001F	ADOPTER	01
02	HPTR57002B	AIR FILTER	01
03	HPTR57003B	CONICAL VALVE SPRING	01
04	HPTR57004F	VALVE	01
05	HPTR57005B	VALVE PIN	01
06	HPTR57006F	CONTROL RING	01
07	HPTR57007F	VALVE BODY	01
08	HPTR57008B	VALVE BODY LOCATING PIN	01
09	HPTR57009B	BEARING NO.1	01
10	HPTR57010F	END PLATE NO. 1	01
11	HPTR57011B	LOCATING PIN Ø2.5	06
12	HPTR57012F	ROTOR	01
13	HPTR57013B	ROTOR VANE	05
14	HPTR57014F	AIR CYLINDER	01
15	HPTR57015F	END PLATE NO. 2	01
16	HPTR57016B	BEARING FOR END PLATE-2	01
17	HPTR57017F	AIR MOTOR BODY	01
18	HPTR57018F	SILENCER	01
19	HPTR57019B	WIRE LOCK	01
20	HPTR57020F	GEAR HOUSING FOR LOCKING SCREW	01
21	HPTR57021F	1 MODULE IDLE GEAR	06
22	HPTR57022F	1 MODULE INTERNAL GEAR	02
23	HPTR57023B	PIN FOR PLANET HOLDER-1 & PLANET HOLDER -2	06
24	HPTR57024F	1 MODULE PLANET HOLDER-1	01
25	HPTR57025B	BEARING FOR BEARING HOUSING NO.-1	01
26	HPTR57026F	BEARING HOUSING NO.-1	01
27	HPTR57027F	FLAT WASHER	01
28	HPTR57028F	1 MODULE INTERNAL GEAR	01
29	HPTR57029B	PLANET HOLDER-2(BIG SIZE)	01
30	HPTR57030F	BEARING FOR PLANET HOLDER 2	01
31	HPTR57031F	BODY FOR GEAR HOUSING	01

SPARE PART LIST FOR WORM HOUSING AND ROLLER FRAME ASSY. Of HPTR-11457

PART NO.	PART NUMBER	PART NAME	QTY.
32	HPTR57032F	WORM HOUSING FRONT COVER	01
33	HPTR57033F	WORM HOUSING GASKET	01
34	HPTR57034F	WORM HOUSING	01
35	HPTR57035F	SPUR GEAR	01
36	HPTR57036B	ALLEN BOLT FOR WORM HOUSING FRONT COVER	08
37	HPTR57037B	BEARING FOR PLANET HOLDER 2	01
38	HPTR57038B	BEARING FOR WORM SHAFT FRONT	01
39	HPTR57039F	KEY FOR WORM SHAFT & SPUR GEAR	01
40	HPTR57040F	WORM SHAFT	01
41	HPTR57041B	BEARING FOR WORM SHAFT BACK	01
42	HPTR57042F	BEARING COVER (BACK SIDE)	01
43	HPTR57043B	ALLEN BOLT FOR BEARING COVER	04
44	HPTR57044B	BEARING FOR WORM HOUSING	02
45	HPTR57045F	FEEDWHEEL SHAFT	01
46	HPTR57046F	WORM WHEEL	01
47	HPTR57047F	WASHER	01
48	HPTRC0048B	CIRCLIP	01
49	HPTRC0049F	ROLLER FRAME	01
50	HPTR57050F	FEED WHEEL	01
51	HPTRC0051F	PRESSURE PAD	01
52	HPTRC0052B	C PIN FOR PRESSURE PAD	01
53	HPTR57053B	GRUB SCREW FOR PRESSURE PAD ADJUSTMENT	01
54	HPTR57054B	GRUB SCREW FOR FEEDWHEEL ADJUSTING (PIN FOR LINK)	01
55	HPTR57055B	ALLEN BOLT FOR LINK PLATE	02
56	HPTR57056F	OLITE BUSH	01
57	HPTR57057F	LINK PLATE	01
58	HPTR57058F	HANDLE	01
59	HPTRC0059B	ALLEN BOLT FOR HANDLE	02
60	HPTR57060B	TENSIONING SPRING(22 COIL)	01
61	HPTR57061B	LOCKING SCREW FOR TENSIONING SPRING & WORM HOUSING	01
62	HPTRC0062F	WORM HOUSING BOTTOM COVER	01
63	HPTRC0063B	CSK SCRWE FOR HOUSING BOTTOM COVER	04
64	HPTR57064B	CSK SCRWE FOR HOUSING ADJUSTMENT	01
65	HPTR57065B	LOCKING SCREW FOR TENSIONING SPRING & ROLLER FRAME	01
66	HPTRC0066B	PIN FOR LINK PLATE & WORM HOUSING	01
67	HPTR57067B	PIN FOR FRONT COVER & WORM HOUSING	02
68	HPTR57068F	ROLLER FRAME SPINDLE	01

Pull the strap from the coil & insert the strap in to the seal in such a way so that flat surface of the seal remains facing outside the strap.
Apply the strap around the package and bottom strap insert through the seal. Then hold the overlap portion of the straps with your left hand.
Bend the extended strap as Hook against the seal.
Pull out excess slack with your right hand.
Hold together the handle and body of the air motor with your right hand and lift upward the air motor portion against the handle to make gap between feed wheel & lower Roller.
Insert the top strap under the strap guide & feed wheel of the tool, at the same time push the tool forward against the Seal, and release by the air motor body.
Turn the Control ring clockwise for tensioning until the proper tension achieved & switch off the motor by turning the control ring anti -clockwise.
Seal the strap by using the recommended Sealer.
Swing the tool up & down until the strap is cut off.
Lubricate the machine at the start of the Shift and at the end of the Shift.

NOTE: Install FRL Unit in every line where pneumatic machines are running.

Before using the tool, read the operating instructions carefully.
Wear hand gloves, safety shoe, Helmet, goggles during operation.
When cutting the strap hold the upper portion and stand safely away from the strap.
Do not stand in line with the strap while it is tensioned. The strap may break.
Do not put your fingers into the Tensioner wheel area.
Do not put your hand under the strap on the job while strap is tensioned.
Only use equipment recommended for the strap. `HPTR-11457’ are recommended only for up to 1.27mm mm thick. X 31.75mm width.