Follow us:

MODEL : SC-35S

  • Light Duty Steel Strap Cutter.
  •  Unique Design
  • Easy to operate & maintain
  • Less cutting pressure required due to special ground profile of cutting edges
  • The spring keeps the top and bottom cutter blades in openCondition.
  • Special Features- Cutting edge hard faced with Cobalt alloy which enables the Cutter to cut 31.75×1.0 mm High tensile strap
View Product Catalogue
Exploded View & Part List
Operation Maintenance & Safety
Watch Product Video
Enquiry Now
  • Light duty steel strap cutter.
  • Unique Design.
  • Easy to operate & maintain.
  • Less cutting pressure required due to special ground profile of cutting edges.
  • The spring keeps the top and bottom cutter blades in open Condition.
  • Cutting edges are hard faced with Cobalt alloy which enables the cutter to cut 31.75mm x1.0mm High tensile strap with minimum pressure.
  • Longer life as cutting edges are ground finish.

Strap Thickness: up to 31.75mm / 1 1/ 4 “
Strap width: up to 31.75mm / 11/4”
Grade : Regular Duty or High Tensile.
Weight :0.760kg / 1.67lbs. (approx)
Dimension (L X W X H) : 270mm x 50mm x 125mm /10.6” x 2”x 4.9”

INDEX

PART NUMBER

PART NAME

QUANTITY

01

MSSC01260F

Top cutter blade

1

02

MSSC02260F

Bottom cutter blade

1

03

MSSC03260F

Guide Pin

1

04

MSSC04260F

Hinge Bolt

1

05

MSSC05260F

Strap Guide

1

06

MSSC06260F

Nut

1

07

MSSC07260F

Spring

1

08

MSSC08260F

Washer

1

09

MSSC09260F

Pin

2

NOTE:

  • INDEX NO. 04, 05, 06 & 08 Can Be Supplied As Spares.
  • All Other Parts Are Manufactured In Paired Basis And Cannot Be Supplied Separately.

OPERATIONAL MANUAL

1. Place one gloved hand on the strap and position yourself so that you are not in the path of the strapping.

2. Cut the strap several inches away from your hand. The cut should be made so that the flying strap is too short to reach any part of the body.

3. Strapping should be cut squarely, not at an angle to avoid sharp strap edge.

4. Immediately dispose of all strapping to avoid accidents and injury.

SAFETY INSTRUCTIONS

1. Wear your safety shoes, gloves, Helmet and safety glasses at all times.

2. Remove oil or grease from your hands, tools and from the floor and area where you will be working.

3. Use proper cutting tool as per type, size of the strap to be cut.

4. Keep fingers way from areas that can pinch or cut. These areas are located at the front of the tool.

5. Only use equipment recommended for the strap. `SC-35S` is recommended only for (0.25-1.0 ) mm thk. x
(9.5-31.75) mm wide strap.

1