Follow us:

MODEL : SC-35

  • Light Duty Steel Strap Cutter.
  •  Strap thickness – up to 1.0 mm.
  • Strap width – up to 31.75mm.
  • Less Cutting Pressure Required (one hand operation)
  • Special Features- Cutting edge hard faced with Cobalt alloy which enables the cutter to cut 31.75×1.0 mm High tensile strap.
View Product Catalogue
Exploded View & Part List
Operation Maintenance & Safety
Watch Product Video
Enquiry Now
  • Light duty steel strap cutter.
  • Unique Design.
  • Easy to operate & maintain.
  • Less cutting pressure required due to special ground profile of cutting edges.
  • Cutting edges are hard faced with Cobalt alloy which enables the cutter to cut 31.75mm x1.0mm High tensile strap with minimum pressure.
  • Longer life as cutting edges are ground finish.

Strap Thickness: up to 1.0mm / 0.040”
Strap width: up to 31.75mm / 11/4”
Grade: Regular Duty or High Tensile.
Weight: 0.750kg / 1.65lbs. (approx)
Dimension (L X W X H): 290mm x 50mm x 66mm / 11.4” x 2”x 2.6”

INDEX

PART NUMBER

                      PART NAME

QUANTITY

01

MSSC01250F

TOP CUTTER

01

02

MSSC02250F

BOTTOM CUTTER

01

03

MSSC03250F

GUIDE PIN

01

04

MSSC04250F

HINGE BOLT

01

05

MSSC05250F

STRAP GUIDE

01

06

MSSC06250F

NUT

01

07

MSSC07250F

WASHER

01
NOTE: No Spares Can Be Supplied Separately Except INDEX NO. 04, 05, 06 & 07.

OPERATIONAL MANUAL

1. Place one gloved hand on the strap and position yourself so that you are not in the path of the strapping.

2. Cut the strap several inches away from your hand. The cut should be made so that the flying strap is too short to reach any part of the body.

3. Strapping should be cut squarely, not at an angle to avoid sharp strap edge.

4. Immediately dispose of all strapping to avoid accidents and injury.

SAFETY INSTRUCTIONS

1. Wear your safety shoes, gloves, Helmet and safety glasses at all times.

2. Remove oil or grease from your hands, tools and from the floor and area where you will be working.

3. Use proper cutting tool as per type, size of the strap to be cut.

4. Keep fingers way from areas that can pinch or cut. These areas are located at the front of the tool.

5. Only use equipment recommended for the strap. “SC-35” is recommended only for 1.0mm thick.x 31.75 mm wide strap.

1