MODELNO.: PPET – 1319
OPERATIONAL MANUAL
  1. Check the Pneumatic hose and FRL in the air line. Air motor should be properly lubricated.
  2. Check the strap before start the operation.
  3. Positioning the strap around the material and hold the overlap portion.
  4. Pull out the excess strap for next operation.
  5. Insert upper & lower strap together in the tool by holding the handle and Tensioner.
  6. Release the Tensioner.
  7. Press the Tensioning lever until the strap is fully tensioned.
  8. Press the vibration lever for cutting the mother strap and friction welding and it will stopped automatically.
  9. Remove the tool by squeezing the reverse lever of the tool.
SAFETY INSTRUCTIONS
  1. Only trained person should operate the tool.
  2. Wear, Helmets, safety shoe, goggles at the time of operation.
  3. Use proper tool for right application.
  4. Do not put hands between the strap and material.
  5. Lubricate the tool time to time. 
 
PNEUMATIC POWER TOOLS & CO.
India Office:
68B, A.P.C. Road, 2nd Floor, A. K. Point, Kolkata – 700 009, India
Ph. No.: +91-33-2352 2813, +91-33-2443 6211 | Mobile: +91-9830869960, +91-9830647905 | Fax No: +91-33-3508892 | Email: info@strappingtoolppt.com

North America Office:
35 Bruce Drive, Shelton, CT 06484
Phone: +208-305-2281 | E-Mail – aveek.datta@romipackaging.com / lina.datta@romipackaging.com
(Contact Romi Packaging www.romipackaging.com for sales inquiry in North America, Mexico and LATAM)

Dubai Office:
Seema Ajit, 324,Sultan Business Center, DUBAI, U.A.E.
Phone - 0097142286318, 00971506510896, 00971505591389 | Email: ajitdxb@eim.ae